Conductivity / Resistivity Monitor / Controller Small Screen Hot Sales High Accuracy

High pure/ultrapure water measurement control, widely used for electronic, electric, pharmacy, fine chemistry, clinical medicine, life science.

    Category:

    Description

    Application

    ● Widely used for monitoring of all water treatment process, which have high performances in high salt water treatment, concentrated solution, recirculating cooling water, reclaimed water and ect.

    ● High pure/ultrapure water measurement control, widely used for electronic, electric, pharmacy, fine chemistry, clinical medicine, life science.

    Feature

    Conductivity Monitor/Controller

    Model FunctionCCT-0100CCT-1100CCT-2000
    Range0～20/200/2000 μS/cm; (C=1.0cm⁻¹)
    0～20/200/2000 ppm; (C=1.0cm⁻¹)
    0～20 mS/cm; (C=1.0cm⁻¹)
    0～200 mS/cm; (C=10.0cm⁻¹)
    0～20 μS/cm (C=0.1cm⁻¹)
    Accuracy1.5%(F.S.)
    Temp.Comp.The 25 ℃ basis,
    automatic temperature compensation
    Oper.Temp.0～100℃
    SensorS-1.0-NTC10K-MINI;
    JL-0.1-NTC10K;
    JL-10.0-NTC10K J-1.0-NTC10K-MINI;
    JF-0.1-NTC10K; SL-1.0-NTC10K;
    JL-1.0-NTC10K; JF-1.0-NTC10K;
    Display3½ Bit LCD
    Current output— — —Isolation 4～20mA
    Control output— — —High limit relay
    PowerAC 110V±10% 50/60Hz
    AC 220V±10% 50/60Hz
    Working environmentAmbient temperature:0～50℃
    Relative humidity: ≤85%
    Dimensions48×96×100mm(H×W×D)
    Hole size45×92mm(H×W)
    Installation modeEmbedded

     

     

    Resistivity Monitor/Controll

    Model FunctionCCT-0100CCT-1100CCT-2100
    Range0～18.25MΩ·cm
    Accuracy2.0%(F.S.)
    Temp.Comp.The 25 ℃ basis,
    automatic temperature compensation
    Oper. Temp.0～50℃
    SensorJ-0.05-NTC-MINI;
    JL-0.05-NTC;
    JF-0.05-NTC;
    Display3½ Bit LCD
    Current output— — —Isolation 4～20mA
    Control output— — —Low limit relay
    PowerAC 110V±10% 50/60Hz
    AC 220V±10% 50/60Hz
    Working environmentAmbient temperature:0～50℃
    Relative humidity: ≤85%
    Dimensions48×96×100mm(H×W×D)
    Hole size45×92mm(H×W)
    Installation modeEmbedded

    NOTE:

    1. High pure water and ultrapure water could not select open sampling measurement method. If the high pure water is exposed to the air, a lot of carbon dioxide would dissolve into the water immediately and the impurity inside the container and dusts in the air would also dissolve into the water which could cause serious errors. So high pure water could only adopt inclosed, running and side flow circulation method.  With open measurement method to test high pure water by using laboratory appliance is inadvisable.

    2. Resin regeneration dirts would pollute the cell, please clean by alcohol cotton ball.

     

    Related products